If used for a long time, the oil seal will be worn. Solution: just replace the new oil seal.
If the oil is not changed for a long time, the quality of the filter element will decline, the oil will become too dirty, and the oil seal will wear faster. Solution: change the hydraulic oil and filter element as soon as possible.
The unbalance and violent vibration of the drive shaft lead to the wear of the spindle swing oil seal. Solution: fix and replace the shaft in time.
Hydraulic oil will deteriorate and emulsify, reduce the lubrication performance and accelerate the wear of oil seal. Solution: change the hydraulic oil and filter element as soon as possible. In severe cases, the system needs to be cleaned.
The pump bracket is loose, the pump is opened, and the fixing bolts of the pump are loose, which leads to the vibration of the whole hydraulic pump and the wear of the oil seal. Solution: always check and eliminate the possibility of failure of fully automatic feeding integrated mixer to prevent and avoid failure.
The oil return of the automatic feeding integrated mixer system is not smooth, and the oil return pipe and radiator are blocked, which leads to the pressure rise in the motor housing and the oil seal leakage. Solution: remove the blockage and stabilize the oil return circuit.
If the radiator does not dissipate heat, the temperature of the oil will become too high, the viscosity and lubricity will be reduced, the oil seal will overheat and the seal will not work.
Solution: remove the obstacles on the radiator and cool the system to prevent the pump motor from wearing. In severe cases, it is necessary to stop and stop the engine and flush the pump motor and radiator housing with water to achieve cooling effect.
During the winter operation, due to insufficient preheating and low oil temperature, the oil seal and oil seal can not reach the ideal working temperature. Countermeasures: stop the oil tank when starting, run at idle speed for 10 to 20 minutes, and replace the oil tank when the oil temperature returns to normal.
The oil seal of the hydraulic pump shaft end of the automatic feeding integrated mixer is very fragile. Strict compliance with relevant regulations can effectively prevent many oil leakage. In case of oil leakage, you need to calm down and determine the specific cause of the problem.
The above content is provided by the automatic mixer, more wonderful please click: http://www.oamenibuni.com We adhere to the integrity-based business philosophy, welcome your cooperation!